Lowongan PT Medco Power Indonesia

PT Medco Power Indonesia adalah perusahaan pembangkit listrik independen (Independent Power Producer/IPP) yang berdiri sejak tahun 2004 dan merupakan bagian dari MedcoEnergi, salah satu perusahaan energi terkemuka di Indonesia. Perusahaan ini mengoperasikan dan mengelola berbagai jenis pembangkit listrik berbasis gas alam, panas bumi, serta energi terbarukan lainnya. Dengan komitmen tinggi terhadap keberlanjutan, Medco Power berperan penting dalam mendukung pasokan listrik nasional, baik untuk kebutuhan industri maupun masyarakat, melalui teknologi efisien dan ramah lingkungan.

Selain mengembangkan proyek pembangkitan listrik, PT Medco Power Indonesia juga menyediakan layanan Operasi & Pemeliharaan (O&M) yang andal, mencakup perawatan, optimasi kinerja, dan pengelolaan aset pembangkit. Perusahaan ini aktif berinovasi untuk mendukung transisi energi, termasuk investasi pada energi bersih seperti tenaga surya dan biomassa. Dengan jaringan proyek yang tersebar di berbagai wilayah Indonesia, Medco Power terus memperluas kapasitas terpasang dan memperkuat posisinya sebagai salah satu pemimpin sektor kelistrikan nasional yang berorientasi pada energi berkelanjutan.

Baca Lainnya

Lowongan Wilmar Group

Lowongan PT Motor Sights International (MSI)

Lowongan PT Frisian Flag Indonesia

Placement:

• Site SULUT – Bolaang Mongondow, Sulawesi Utara
• Site TIMOR – Kupang, Nusa Tenggara Timur

Control & Instrument DCS Supervisor (CFSPP TIMOR-1)

Placement : Kupang, Nusa Tenggara Timur

Job Description:

• Assisting M & R Manager in making & implementing plan of activity Maintenance of power plant unit as well as good, especially maintenance and reliability of engine.
• Organize Instrument & Control team in case of scheduled and unscheduled maintenance.
• Ensure that company policies and systems are clearly understood and implemented effectively and efficiently by each subordinate.
• Responsible for Security, Safety, Health and Environment of work area.

Requirements:

• Bachelor degree in Electrical Engineer.
• Experiences minimum 5 years experience as Engineer at Power plant.
• Experience in the electrical maintenance especially in Coal Fired Power Plant.
• Have management and leadership skills.
• Proficient in operating Microsoft Office.
• Fluently both speaking and written in English.
• Have the skills and knowledge of Power Plant.
• Willingness to relocate in Kupang, Nusa Tenggara Timur.

E&I Technician (MGS)

Placement : Tarutung – North Sumatera

Job Description:

• Perform maintenance work such as overhauling, repair, calibration, and testing of all plant electrical equipment and instruments base on established manufacturer standards.
• Maintain plant calibration database and perform scheduled calibrations.
• Perform preventive maintenance job on all plant electrical equipment, instruments and DCS control equipment based on established Computerized Maintenance Management System quality standards and schedules.
• Conduct routine inspection and monitoring of all electrical, instrumentation, DCS control system and 150kV line protection system equipment conditions and perform functional check to ensure optimum reliability.
• Report immediately to superior any indications of abnormal conditions based on established standards set by the department.
• Perform Call-Out and On-call duties as required by operations to minimize or prevent plant downtime.
• Assist Operations Section during start up, test and initial operation of newly overhauled plant equipment facilities, ensuring optimum reliability.
• Troubleshoot and recommend actions or solutions to eliminate future reoccurrences.
• Ensure any repairs/calibrations performed by outside contractors meet acceptable standards.
• Assist during periodic parts and equipment inventory.
• Execute installation works of any plant facility instrument upgrading or rehabilitation project as directed by superior.
• Maintain tools and precision instrument or equipment under responsibility in good condition.
• Monitor contractors’ activities, workmanship and progress to ensure compliance with specifications, standards and work durations.
• Execute health, security, environmental and safety rules and regulations.
• Implement and comply with company rules and policies.

Requirements:

• Graduate of Diploma 3 Degree preferably in Electrical/Computer or Electronics Engineering.
• Minimum 5 years technical experience in power plants or similar heavy industry; geothermal experience is an advantage.
• Good planning and computer programming skills.
• Good communication and reporting skills in English.
• Willingness to work weekends, holidays and overtime.
• Willingness to travel and relocate in Tarutung, North Sumatra.
• Multi-cultural knowledge and working experience.

Operation Shift Coordinator (CFSPP Timor-1)

Placement : Kupang, NTT

Job Description:

• Organize Operators in recording and observing engine operation parameters.
• Set up the Operators assignment at the time of the shift.
• Periodic observation of supporting equipment in the field and delegating to Operators.
• Compile and summarize logbook of all parameters to Operation Engineer.
• Coordinate and cooperate with PLN WRKR or PLN Dispatcher and gas supplier.
• Responsible to achieve production targets.
• Responsible for Security, Safety, Health and Environment of work area.

Qualifications:

• Bachelor degree in Electrical / Mechanical Engineering.
• Knowledge of Coal Fired Power Plant.
• Experienced in operation of Coal Fired Power Plant.
• Have management and leadership skills.
• Fluently both speaking and written in English.
• Able to operate Microsoft Office and related Power Plant Software.
• Minimum 3 years experience as Unit Controller CCR of Coal Fired Power Plant.
• Willingness to relocate in NTT (Kupang).

Technician DCS & Instrument Control (O&M Ijen)

Job Description:

• Perform maintenance work such as overhauling, repair, calibration, and testing of all plant DCS equipment base on established manufacturer standards.
• Maintain plant calibration database and perform scheduled calibrations.
• Perform preventive maintenance job on all plant DCS equipment based on established Computerized Maintenance Management System quality standards and schedules.
• Conduct routine inspection and monitoring of all DCS and 150kV line protection system equipment conditions and perform functional check to ensure reliability.
• Report immediately to superior any indications of abnormal conditions.
• Perform Call-Out and On-call duties to minimize or prevent plant downtime.
• Assist Operations Section during start up, test and initial operation of newly overhauled plant equipment facilities.
• Troubleshoot and recommend appropriate actions to eliminate future reoccurrences.
• Ensure repairs/calibrations performed by outside contractors meet company standards.
• Assist during periodic parts and equipment inventory.
• Execute installation works of any plant facility instrument upgrading or rehabilitation project as directed.
• Maintain tools and precision instruments under responsibility in good condition.
• Monitor contractors’ activities and progress to ensure compliance.
• Execute health, security, environmental and safety rules.
• Comply with company rules and policies.
• Perform other related duties as assigned.

Requirements:

• Graduate of Diploma 3 Degree preferably in Electrical/Control & Instrument/Computer or Electronics Engineering.
• Minimum 5 years technical experience in power plants or similar heavy industry; geothermal experience is an advantage.
• Good planning and computer programming skills.
• Good communication and reporting skills in English.
• Experience in multi-national project development is desirable.

Control & Instrument DCS Technician (CFSPP Timor-1)

Placement : Kupang, NTT

Job Description:

• Implementing unscheduled maintenance.
• Maintaining mechanical equipment and supporting equipment.
• Responsible for Security, Safety, Health and Environment of work area.

Requirements:

• Bachelor / Diploma degree in Electrical/Physics Engineering.
• Experience in the maintenance especially in Electrical System Power Plant.
• Proficient in operating Microsoft Office.
• Fluently both speaking and written in English.
• Have the skills and knowledge of Power Plant.
• Preferably minimum 1 year experience as Technician at Power Plant or fresh graduate.
• Willingness to relocate in Kupang.

Mechanical Technician (CFSPP Timor-1)

Job Description:

• Implementing unscheduled maintenance
• Maintaining mechanical equipment and supporting equipment
• Responsible for Security, Safety, Health and Environment of work area.

Requirements:

• Bachelor / Diploma degree in Mechanical Engineering
• Experience in the maintenance especially in mechanical System Power Plant
• Proficient in operating Microsoft Office
• Fluently both speaking and written in English
• Have the skills and knowledge of Power Plant
• Work Experiences preferably Minimum 1 (one) year experience as Technician at Power Plant or fresh graduate
• Willingness to relocate in Kupang

Procurement Supervisor (CFSPP Timor-1)

Job Description:

• Coordinate and direct the activities that related to Procurement in a cost efficiency and timely manner to support organization effectiveness.
• Develop Procurement procedure
• Manage procurement procedure from User to supplier
• Ensure the part / equip is as per user request
• Recording and manage the purchase process document.
• Responsible for Security, Safety, Health and Environment of work area

Requirements:

• Bachelor degree in all major
• Fluent in Procurement procedures
• Fluently both speaking and written in English
• Having strong Leadership
• Having knowledge in computerized program used in the procurement
• Proficient in communicating well with internal and external company
• Minimum 5 years in Logistic or warehouse.
• Willingness to relocate in NTT (Kupang)

Field Operator (CFSPP Timor-1)

Job Description:

• In charge of the assigned plant during normal and incident operation.
• Operate the plant with the agreement of the Unit Controller.
• Provides a field supervision service to outside the control rooms during normal and incident operation.
• In the event of a Unit Trip or on the instruction of a Shift leader /UC/AUC, immediately reports to the Control Room. They assist the Shift leader/UC/AUC during any incident by monitoring plant conditions.
• To assist the UC/AUC during planned start-ups. This role depends on the number and urgency of technical problems existing at the time.
• Operate the equipment from local control room with guidance from Unit Controller from Central Control Room.
• Provide daily report to the Unit Controller and ensure there is no problems or anomalies in the main plant
• Check and control the field situation by doing inspection and field visit, to ensure system and process in the condition as reported

Requirements:

• Minimum Diploma Degree (D3)
• Minimum 1 years experience in fixed plant, heavy equipment or utilities operator or fresh graduate
• Preferable knowledge in fire protection and fire fighting
• Preferable knowledge in electrical (high voltage)
• Knowledge in basic mechanical (bearing system, hydraulic system, rotating equipment etc)
• Capable to think and solve problems logically
• Proficient in English Language
• Willingness to relocate in NTT (Kupang)

HSE Supervisor (CFSPP Timor-1)

Job Description:

• Assist the project team to prepare Project HSE requirements
• Involve in the preparation of Project HSE Execution Plan
• Assist project team to prepare Project Readiness
• Assist project and operation team for readiness of HSE equipment and its requirement
• Assess risks and job hazard analysis process of identifying hazards and putting controls in every construction stage
• Conducts regular site HSE inspections, reports deficiencies, analyzes inspection and incident data to identify opportunities to develop preventive and corrective practices
• Prepare and submit statutory and internal reports required by company and/or clients
• Participate in regulatory agency and lenders inspections to ensure compliance with all local, national and lenders requirements
• Conducting evaluation, assessments and HSE audit
• Conducts all job related HSE engineering and process safety
• Familiar with HSE data management including HSE statistic and greenhouse gas calculation
• Prepare Weekly, and Monthly Safety Report
• Monitor all construction work activity for conformance with HSE requirements
• Performing a strong visible commitment in to HSE Management System

Requirements:

• Bachelor’s degree in Occupational Safety, Mechanical, Civil, Electro, Environmental or related Engineering disciplines
• Minimum 7 years experiences in HSES Officer
• Understand O&M Safety, familiar with HSE Engineering, Fire Protection System and Understand HAZID / HAZOP
• Familiar with codes of ANSI, ASME, NFPA standards and OSHA
• Certifications of AK3 Umum or AK3 Migas, ISO (14001 and 45001), SMK3 Auditor, Fire Fighting, Heavy Lifting and Electrical Safety, and other environmental competencies
• Excellent communication, presentation, and interpersonal skills
• Fluent in English, both verbal and non-verbal
• Proficient in MS Office (Excel, Word, Power Point)
• Willingness to relocate in NTT (Kupang)

Performance Staff (CFSPP Sulut-1)

Job Description:

• Calculate unit availability and heat rate
• Conduct coal fineness sampling
• Perform internal performance test
• Provide material for monthly report
• Provide performance weekly report
• Collect data and monitoring equipment performance
• Monitoring Continuous Emission Monitoring System (CEMS) in accordance with the policy from the government

Requirements:

• Bachelor Degree of Mechanical/Chemical/Electrical Engineering
• 3 years experiences in Power Plant Industry or 2 years experiences in Power Plant Performance Section.
• Be able to communicate clearly and concisely as well as working without supervision
• Willingness to relocate in North Sulawesi

Mechanical Technician (CFSPP Sulut-1)

Job Description:

• Implementing unscheduled maintenance.
• Maintaining mechanical equipment and supporting equipment.
• Responsible for Security, Safety, Health and Environment of work area.

Requirements:

• Bachelor / Diploma degree in Mechanical Engineering.
• Experience in the maintenance especially in mechanical System Power Plant.
• Proficient in operating Microsoft Office.
• Fluently both speaking and written in English.
• Have the skills and knowledge of Power Plant.
• Work experiences preferably minimum 1 (one) year experience as Technician at Power Plant or fresh graduate.
• Willingness to relocate in North Sulawesi.

Unit Supervisor (CFSPP Sulut-1)

Job Description:

• Assist make improvements under the Operator Leader approval of the engines and their support equipment.
• Assist in recording and observing engine operation parameter data and reporting to superiors in case of equipment interruption.
• Periodic monitoring of supporting equipment in the field.
• Prepare the supporting data for the manufacturing of enginery operation report.
• Coordination and cooperation with PLN WRKR or PLN Dispatcher and gas supplier.
• Provide maximum support in achieving production targets.
• Responsible for Security, Safety, Health and Environment of work area.

Requirements:

• Bachelor degree in Electrical / Mechanical Engineering.
• Minimum 3 (three) years experience as Operator in Coal Fired Power Plant.
• Have knowledge of Operation in Coal Fired Power Plant.
• Fluently both speaking and written in English.
• Willingness to relocate in North Sulawesi.

Field Operator (CFSPP Sulut-1)

Job Description:

• In charge of the assigned plant during normal and incident operation.
• Operate the plant with the agreement of the Unit Controller.
• Provides a field supervision service to outside the control rooms during normal and incident operation.
• In the event of a Unit Trip or on the instruction of a Shift leader / UC / AUC, immediately reports to the Control Room and assists the Shift leader / UC / AUC during any incident by monitoring plant conditions.
• Assist the UC / AUC during planned start-ups, depending on the number and urgency of technical problems existing at the time.
• Operate the equipment from local control room with guidance from Unit Controller from Central Control Room.
• Provide daily report to the Unit Controller and ensure there are no problems or anomalies in the main plant.
• Check and control the field situation by doing inspection and field visit to ensure system and process are in the reported condition.

Requirements:

• Minimum Diploma Degree (D3).
• Minimum 1 year experience in fixed plant, heavy equipment or utilities operator, or fresh graduate.
• Preferable knowledge in fire protection and fire fighting.
• Preferable knowledge in electrical (high voltage).
• Knowledge in basic mechanical (bearing system, hydraulic system, rotating equipment, etc).
• Capable to think and solve problems logically.
• Proficient in English Language.
• Willingness to relocate in North Sulawesi.

Material Handling Operator (CFSPP Sulut-1)

Job Description:

• In charge of the assigned plant during normal and incident operation.
• Operate the plant with the agreement of the Controller Material Handling.
• Provides a field supervision service to outside the control rooms during normal and incident operation.
• In the event of equipment Trip or on the instruction of a Controller, immediately reports to the Control Room and assists the Controller during any incident by monitoring plant conditions.
• Check and control the field situation by doing inspection and field visit to ensure system and process are in the reported condition.
• Operate equipment locally to monitor problem or assist maintenance team.
• Pre-start check all equipment parts before operating or running the equipment.
• Perform check of grease levels for Lubrication 01 and Lubrication 02, oil engine level, oil hydraulic level, and cooling water level, or pump grease manually if necessary.
• Test run the system or equipment before ship arrival or before operating manually and automatically.
• Maintain good quality of raw material to avoid equipment damage and unnecessary work.
• Use light tools for minor trouble on the equipment.
• Identify trouble (location, part, or name of equipment) before reporting to control room and supervisor.
• Perform full handover to next shift work in the cabin of equipment.
• Perform two-way communication with control room, supervisor, contractor, and any involved party.
• Loading gypsum, bottom ash, fly ash, and other waste onto trucks.
• Keep operations environmentally safe and at high production levels.
• Perform housekeeping after/before work.
• Coordinate with maintenance department and contractors working in the field.

Requirements:

• Minimum Diploma Degree (D3).
• Minimum 1 year experience in fixed plant, heavy equipment, or utilities operator, or fresh graduate.
• Knowledge in fire protection and fire fighting.
• Basic knowledge in electric, mechanic, and chemistry.
• Capable to think and solve problems logically.
• Willingness to relocate in North Sulawesi.